MACHINE FOR AUTOMATIC ASSEMBLY/INSERTION OF RECTANGULAR WIRE HAIRPIN CONDUCTORS INTO THE DC MOTOR ARMATURE SLOTS (ACM74 SERIES)
| The ACM74 series of machines are designed for the automatic assembling and insertion of rectangular wire hairpin conductors into the DC motor armature slots. The haipin conductors are fed to the entry magazine by means of a chain elevator (in case this machine is connected to a hairpin coil forming machine) and are arranged automatically (passing through a guiding chute) to they half length into the armature slots and pressed to be inserted to their full length inside the slots. A three-seat rotary indexing table allows simultaneous loading/unloading of the armature from the first seat, arranging of conductors into the second seat and full length insertion of the coils in the armature on the third seat.
Approximate capacity: 55 armatures/hr.
|1||Workpiece type||DC motor armature|
|2||Maximum armature stack diameter, mm||96|
|3||Minimum armature stack diameter, mm||60|
|4||Maximum hairpin conductor length, mm||196|
|5||Minimum hairpin conductor length, mm||120|
|6||Power supply, V||upon request|
|7||Air pressure supply, MPa||0.6|
|8||Overall dimensions: lenght/width/height, mm||2000/1500/1200|