ROUND WIRE CONDUCTOR END TWISTING MACHINE FOR DC MOTOR ARMATURES (ACM120) |
||
The ACM120 machine is designed for synchronized two-side round wire conductor end twisting by means of coaxial spindles, driven pneumatically through lever mechanism. Inner and outer twisting tools alignment and twisting angle are adjusted using the respective stop screws and a fly-wheel. Handles used for the adjustment are conveniently disposed in the front side of the machine, allowing easy access to the operator. Twisting tools are made out of high-grade hardened and ground steel. Approximate capacity: 300 armatures/hr. |
||
# | Parameter |
Value |
1 | Workpiece type | DC motor armature |
2 | Maximum armature stack diameter, mm | 73.3 |
3 | Armature stack length, mm | 64 |
4 | Inner spindle hole, mm | 22 |
5 | Maximum twisted wire length (before twising), mm | 70 |
6 | Maximum twisting angle (for each spindle), ° | 65 |
7 | Maximum twisting torque by 5 bar, Nm | 2õ400 |
8 | Power supply, V | 3x380V/50Hz or upon request |
9 | Air pressure supply, MPa | 0.6 |
10 | Overall dimensions: length/width/height, mm | 1000/600/1250 |
11 | Weight, kg | 400 |
www.ameka.bg |