CONTINUOUS "U"-SHAPED INSULATION FORMING AND INSERTION INTO THE DC MOTOR ARMATURE SLOTS (ACM125) |
||
ACM125 is a readjustable automatic machine, designed for continuous
paper insulation laying into DC motor armature "U"-shaped open slots.
Raw material is a roll of insulation paper with the appropriate width.
A combined gravity magazine is used for armature blanks loading and
finished armatures unloading, disposed bellow the main supporting
plate. On the machine supporting plate are disposed the main machine
units as follows: Approximate capacity: 1 sec. per slot |
||
# | Parameter |
Value |
1 | Workpiece type | DC motor armature |
2 | Maximum armature shaft length, mm | 240 |
3 | Minimum armature shaft length, mm | 180 |
4 | Maximum armature stack diameter, mm | 73 |
5 | Maximum armature stack length, mm | 65 |
6 | Maximum number of armature slots | 29 |
7 | Cycle time per slot, sec. | 1...1.5 |
8 | Power supply, V | 3x380V, 50Hz or upon request |
9 | Air pressure supply, MPa | 0.55 |
10 | Overall dimensions:length/width/height, mm | 1900/900/1710 |
11 | Weight, kg | 350 |
www.ameka.bg |