BRAZING CLIP FORMING AND INSERTION MACHINE FOR STARTER ARMATURE (ACM141) |
||
ÀÑÌ141 is an automatic machine, designed for the brazing clip forming and insertion operation on the inner row coil/conductor ends of the starter armature. Machine bed is made out of aluminum profiles with steel nickel-plated supporting plate, where main machine units are disposed, as follows: Approximate capacity: 80 armatures/hour for 25-slot armature |
||
# | Parameter |
Value |
1 | Workpiece | Starter armature |
2 | Armature shaft length range, mm | 250...480 |
3 | Maximum armature stack diameter, mm | 120 |
4 | Maximum armature stack length, mm | 140 |
5 | Maximum number of armature slots | 29 |
6 | Cycle time per slot, s | 1.3...1.5 |
7 | Installed power, kW | 1 |
8 | Power supply, V | 3 õ 415V/50Hz |
9 | Air pressure supply, MPa | 0.4 |
10 | ||
Overall dimensions: length/width/height, mm | 900/700/1710 | |
11 | Weight, kg | 250 |
www.ameka.bg |