Â,S,C,O-SHAPED SLOT INSULATION FORMING AND INSERTION MACHINE FOR STARTER ARMATURES (ACM36) |
||
The
ACM36 machine is designed for the automatic forming of Â,S,C,O-shaped
slot insulation and its insertion into the starter armature slots. Raw
material is a roll of insulation paper with the appropriate width. The
machine frame is made out of alluminum profiles with solid steel plates
carrying the paper guiding, forming, feeding and cutting-off
mechanisms. The forming is achieved by means of pairs of profiled
rollers with a possibility for intermediate heating. A two-seated
indexing attachment for fixing the armature allows changing the
finished part with a new one without loss of time.
Approximate capacity: 60 armatures/hr. |
||
# | Parameter |
Value |
1 | Type of workpiece | DC motor starter armature |
2 | Maximum armature shaft length, mm | 500 |
3 | Minimum armature shaft length, mm | 150 |
4 | Maximum diameter of the armature stack, mm | 95 |
5 | Maximum length of teh armature stack, mm |
150 |
6 |
Maximum number of armature slots | 99 |
7 | Cycle time per slot, sec. | 1..1,5 |
8 | Power supply, V | upon request |
9 | Air pressure supply, MPa | 6.0 |
10 | Overall dimensions: length/width/height, mm | 1400/700/1700 |
11 | Weight, kg | 200 |
www.ameka.bg |