AUTOMATIC MACHINE FOR SIMULTANEOUS CLEANING OF OUTSIDE AND INSIDE DIAMETER OF CAR ALTERNATOR STATORS (ACM57)

ACM57 is a bench model semi-automatic machine with manual loading/unloading of the workpiece, intended to joint together the operations of removing old paint or impregnation varnish simultaneously form the surface of both inside and outside diameters of car alternator stators, mainly those with smooth outside diameter surface. The outside surface is cleaned by means of steel wire circular brush rotating with axis parallel to the axis of the workpiece. For the inner diameter the classic sanding process is adopted, using a slotted rubber drum for the sanding band support.

Approximate capacity: 240 stators/hour

#

Parameter

Value
1 Workpiece car alternator stator
Maximum stator core I.D., mm 130
Minimum stator core I.D., mm 80(65 with Ô2" abrasive belt)
Stator core O.D. range, mm 100...170
Maximum stator core width, mm 35
Operation I. D. Sanding and O.D. Brushing
2 Workpiece drive  
Type of motor MO71B/8D
Motor power, kW 0.12
Motor speed at 50 Hz, RPM 670
Workpiece spindle speed at 50Hz, RPM 112
Driving belt POLYFLEX JB, 5M850, GATES
3 Sanding band spindle drive  
Type of motor MO80A/2D
Motor power, kW 0.75
Motor speed at 50 Hz, RPM 2800
Spindle speed at 50Hz, RPM 4520
Sanding band speed, m/s 18
Driving belt POLYFLEX JB, 7M850, GATES
4 Wire wheel brush drive  
Type of motor MO90L/2D
Motor power, kW 2.2
Spindle speed at 50Hz, RPM 2800
Wire brush speed, m/s 30
Driving belt POLYFLEX JB, 7M850, GATES
5 Sanding belt dimensions  
Diameter, mm 76.2 (3")/50.8(2")
Width, mm 38,1 (1 1/2")
6 Wire brush dimensions  
Diameter, mm 203.2 (8")
Width, mm 38.1 (1.5")
7 Power supply, V 3x220V, 60Hz
8 Air pressure supply, MPà 0.6
9 Overall dimensions: length/width/height, mm 710/950/660
10
Weight, kg 230
www.ameka.bg