Â,S,C,O -SHAPED SLOT INSULATION FORMING AND INSERTION MACHINE FOR ALTERNATOR STATORS (ACM67) |
||
The ACM67 machine is designed for the automatic forming of Â,S,C,O-shaped slot insulation and its insertion into the generator stator slots. Raw material is a roll of insulation paper with the appropriate width. The machine frame is made out of aluminum profiles with solid steel plates carrying the paper guiding, forming, feeding and cutting-off mechanisms, as well the indexing mechanism that orientates the stator to the next working position. The forming is achieved by means of pairs of profiled rollers with a possibility for intermediate heating. The processed stator is fixed to the changeable workpiece seat by means of a bayonet clamping device. Approximate capacity: 40-60 stators/hr. |
||
# | Parameter |
Value |
1 | Workpiece | Alternator stator |
2 | Stator core length, mm | 20...50 |
3 | Stator core O.D., mm | 190 |
4 | Stator core I.D., mm | 80 |
6 |
Maximum number of stator slots | 99 |
7 | Cycle time per slot, s | 1..1.5 |
8 | Power supply, V | ïî æåëàíèå |
9 | Optimum machine air pressure supply, ÌÐà | 0.5 |
10 | Forming rollers air pressure supply, ÌÐà | 0.25 |
11 | Feeding belts air pressure supply, ÌÐà | 0.3 |
12 | Overall dimensions: length/width/height, mm | 1400/700/1700 |
13 | Weigth, kg | 200 |
www.ameka.bg |