BENCH TYPE AUTOMATIC FINISH TURNING MACHINE FOR PLASTIC ROLLERS (ACM90) |
||
ÀÑÌ90 is a bench type automatic readjustable machine, designed for the burrs removal of plastic rollers by means of a special profiled tool. The machine is accommodated to process three varieties of plastic rolls. The roll that is to be processed is heaved by the rotary center (actuated by its pneumatic cylinder) toward the rotating spindle. The friction forces of the spindle face, applied on the roller surface, set the workpiece on motion. The toolholder slide is shifted toward the workpiece, the cutting tool process the roll, executing finish turning of the surface and after working cycle is finished all machine units are brought back to initial position. Approximate capacity: 500-600 pcs./hour |
||
# | Parameter |
Value |
1 | Workpiece | Drawer slide plastic roller |
Plastic roller outer diameter, mm | 25.5 ...33.2 | |
Plastic roller inner diameter, mm | 5...8 | |
Plastic roller width, mm | 8 | |
2 | Spindle drive | AC motor |
AC motor power, kW | 0.18 | |
Motor speed, RPM | 1310 min-1 | |
3 | Cycle time, s | 6 |
4 | Power supply, V | 3 õ 380V/50Hz |
5 | Air pressure supply, MPa | 0.6 |
6 | ||
Overall dimensions: length/width/height, mm | 800/700/700 | |
7 | Weight, kg | 150 |
www.ameka.bg |